Replacement Bathtub Knobs

Replacing Bathtub Knobs: A Step-by-Step Guide

Replacing bathtub knobs is a simple and straightforward task that can be completed in just a few steps. Whether you're upgrading your bathroom's style or repairing old, leaky knobs, this guide will provide you with everything you need to know.

Materials You'll Need

* New bathtub knobs * Adjustable wrench * Plumber's tape * Screwdriver

Step 1: Turn Off the Water Supply

Before you begin, turn off the water supply to the bathtub using the valves located under the sink. This will prevent water from spraying out when you remove the old knobs.

Step 2: Remove the Old Knobs

Use an adjustable wrench to grasp the old knob and turn it counterclockwise to loosen it. Once it's loose, you can unscrew it by hand.

Step 3: Wrap Plumber's Tape

Before installing the new knob, wrap a few layers of plumber's tape around the threads of the new stem. This will help create a watertight seal.

Step 4: Install the New Knob

Screw the new knob onto the stem by hand, then use the adjustable wrench to tighten it securely. Turn it clockwise until it's snug, but avoid overtightening.

Step 5: Reinstall the Escutcheon

If your bathtub knobs have escutcheons (the decorative plates around the knobs), reinstall them by screwing them back into place with a screwdriver.

Step 6: Turn On the Water Supply

Once the knobs are installed, turn on the water supply and check for leaks. If any leaks occur, tighten the knobs further or add additional plumber's tape to the threads.

Tips for Success

* Choose knobs that fit your bathtub's style and finish. * Replace both knobs at the same time to ensure they match. * If you're having trouble removing the old knobs, apply penetrating oil to the threads and let it sit for a few minutes before trying again. * If you're not comfortable replacing bathtub knobs yourself, call a licensed plumber for assistance.

Moen Clear Knob Shower Handle In The Faucet Handles Department At Com