Sterling Bathtub Surround Installation Instructions

Sterling Bathtub Surround Installation Instructions: A Step-by-Step Guide

Installing a Sterling bathtub surround is a great way to update the look of your bathroom. The process is relatively simple and can be completed in a few hours. Here are the essential steps to ensure a successful installation:

Step 1: Gather Your Tools and Materials

Before you begin, gather the following tools and materials: * Sterling bathtub surround kit * Level * Caulk gun * Caulk * Utility knife * Measuring tape * Pencil

Step 2: Remove the Old Surround (if applicable)

If you are replacing an existing bathtub surround, you will need to remove it first. This can be done by carefully prying it away from the wall with a utility knife. Be careful not to damage the wall or the bathtub.

Step 3: Clean the Wall and Bathtub

Once the old surround is removed, clean the wall and bathtub thoroughly. This will help the new surround adhere properly.

Step 4: Measure and Cut the Surround

Measure the length and width of the area where the surround will be installed. Cut the surround to size using a utility knife.

Step 5: Apply Caulk to the Wall

Apply a bead of caulk around the perimeter of the area where the surround will be installed. This will help to seal the surround and prevent water from getting behind it.

Step 6: Press the Surround into Place

Press the surround into place on the wall. Make sure that the caulk bead is completely covered.

Step 7: Level the Surround

Use a level to check that the surround is level. If it is not level, adjust it until it is.

Step 8: Secure the Surround

Secure the surround to the wall using the provided screws.

Step 9: Caulk the Joints

Apply a bead of caulk to all of the joints between the surround and the wall or bathtub. This will help to seal the surround and prevent water damage.

Step 10: Allow the Caulk to Dry

Allow the caulk to dry completely before using the bathtub. This will give the caulk time to set and seal properly. By following these steps, you can successfully install a Sterling bathtub surround and enjoy a beautiful, updated bathroom.