Kohler Lift and Turn Bathtub Drain Stopper Replacement
Replacing the drain stopper in your Kohler lift and turn bathtub is a simple task that can be completed in a matter of minutes. By following these easy steps, you can ensure that your bathtub drains properly and looks its best.
Tools and materials you'll need:
- New bathtub drain stopper
- Phillips head screwdriver
- Adjustable wrench
Step-by-step instructions:
1. Remove the old drain stopper.
Using a Phillips head screwdriver, remove the two screws that hold the faceplate of the drain stopper in place. Once the screws are removed, the faceplate will come off, revealing the stopper body.
2. Loosen the locknut.
Using an adjustable wrench, loosen the locknut that is located on the underside of the stopper body. The locknut is typically made of plastic and may be difficult to loosen. If necessary, you can use a pair of pliers to grip the locknut and turn it.
3. Remove the stopper body.
Once the locknut is loosened, the stopper body can be removed by pulling it straight up. The stopper body is typically made of brass or plastic and will have a gasket or O-ring that seals it to the drain opening.
4. Install the new drain stopper.
Insert the new drain stopper into the drain opening and align it with the holes in the faceplate. Thread the locknut onto the stopper body and tighten it using an adjustable wrench. Be careful not to overtighten the locknut, as this can damage the stopper.
5. Install the faceplate.
Place the faceplate over the drain stopper and align it with the holes in the stopper body. Insert the screws into the holes and tighten them using a Phillips head screwdriver. Be careful not to overtighten the screws, as this can damage the faceplate.
6. Test the drain stopper.
To test the drain stopper, fill the bathtub with water and then lift and turn the stopper to close it. The water should stop flowing out of the bathtub. If water continues to leak out, the stopper may not be properly installed or the gasket or O-ring may need to be replaced.
By following these simple steps, you can easily replace the drain stopper in your Kohler lift and turn bathtub.
Danco Lift And Turn Tub Drain Stopper In Chrome 88599 The Home Depot
Kohler Part K 29598 Cp 2 In H Pop Up Bathtub Drain Stopper And Lift Toggle Polished Chrome Drains Parts Home Depot Pro
Kohler Bathtub Shower Drain Accessories At Com
Sento Chrome Lift And Turn Bathtub Drain Assembly Stopper Kit Fit Both 1 2 Inch Or 5 8 Strainer Heavy Duty Metal With Matching S Easy Installation Polished Com
Pf Waterworks Lift N Turn Bathtub Stopper Ch Pf0950 The Home Depot
Danco Lift And Turn Tub Drain Stopper In Chrome 88599 The Home Depot
Danco Lift And Turn Tub Bath Drain Stopper Chrome 88599 Com
Jones Stephens Chrome Lift And Turn Plated Drain In The Bathtub Drains Department At Com
Trouble Removing Lift And Turn Bathtub Stopper R Fixit
Everbilt Lift And Turn Bath Tub Drain Remodel Kit In Brushed Nickel 864930 The Home Depot
