Kohler Bathtub Jets Not Working Properly

Kohler Bathtub Jets Not Working Properly? Here's How to Fix Them

Kohler bathtubs are known for their luxurious and relaxing experience, but when the jets stop working, it can be a major disappointment. If you're facing this issue, don't worry – you may be able to fix it yourself with a few simple steps.

Check the Circuit Breaker

The first thing to check is the circuit breaker or fuse that powers the bathtub jets. If the breaker has tripped or the fuse has blown, the jets will not receive any electricity and will not work. Reset the breaker or replace the fuse and see if the jets start working again.

Clean the Jet Nozzles

Over time, mineral deposits and other debris can build up in the jet nozzles, blocking the flow of water. To clean the nozzles, use a small brush or a cotton swab to gently scrub away any buildup. You can also soak the nozzles in a vinegar solution to help dissolve any mineral deposits.

Check the Impeller

The impeller is a small propeller-like device that circulates the water through the jets. If the impeller is clogged or damaged, it can prevent the jets from working properly. To check the impeller, remove the jet faceplate and look for any obstructions or damage. If the impeller is clogged, you can clean it with a small brush or a cotton swab. If the impeller is damaged, it will need to be replaced.

Inspect the Air Venturi

The air venturi is a small hole in the jet faceplate that allows air to be drawn into the water stream, creating a more forceful and invigorating massage. If the air venturi is blocked, the jets will not be able to draw in air and will not work properly. To clean the air venturi, use a small pin or a toothpick to gently clear away any obstructions.

Replace the Jet Pump

If you have tried all of the above steps and the jets are still not working, the jet pump may be faulty. The jet pump is responsible for circulating the water through the jets, and if it is not working properly, the jets will not be able to function. To replace the jet pump, you will need to contact a qualified plumber.