Install Bathtub Spout Slip Fit Type

Installing a slip fit bathtub spout is a relatively simple plumbing task that can be completed in a few hours with the right tools and materials. Here are the essential steps to follow:

Gather your tools and materials

Before you begin, make sure you have all the necessary tools and materials. You will need:

Slip fit bathtub spout
Plumber's tape
Adjustable wrench or channel-lock pliers
Clean cloth or rag

Prepare the bathtub

Start by preparing the bathtub for the new spout. Remove the old spout by unscrewing the nut that holds it in place. Clean the threads on the bathtub with a clean cloth or rag to remove any old sealant or debris.

Apply plumber's tape

Wrap the threads on the bathtub with plumber's tape. This will help to create a watertight seal and prevent leaks.

Install the slip fit spout

Place the slip fit spout over the threads on the bathtub and hand-tighten it as much as possible. Use an adjustable wrench or channel-lock pliers to tighten the spout further, but be careful not to overtighten it.

Test the spout

Turn on the water and check for leaks. If there are any leaks, tighten the spout further or apply additional plumber's tape.

Finish up

Once the spout is installed and there are no leaks, you can finish up by cleaning up the area and putting away your tools. Enjoy your new bathtub spout!