How To Take Out Bathtub Drain

How to Take Out a Bathtub Drain ##

A bathtub drain is an essential component that allows water to flow out of the tub and prevents it from overflowing. However, over time, the drain can become clogged with hair, soap scum, and other debris, which can lead to slow drainage or even a complete blockage. If you're facing this issue, you may need to take out the bathtub drain to clean it or replace it.

Here's a step-by-step guide on how to take out a bathtub drain:

1.Gather the Necessary Tools and Materials: - Adjustable wrench - Phillips head screwdriver - Flat head screwdriver - Bucket or container to collect water - Rags or towels to absorb spills - New drain assembly (if replacing the old one) 2.Turn Off the Water Supply: Locate the water supply valves that control the water flow to the bathtub. These valves are typically located under the sink or behind the bathtub. Turn off both the hot and cold water valves to prevent water from flowing into the tub while you work. 3.Remove the Overflow Plate: The overflow plate is a small, round or rectangular plate located near the top of the bathtub, typically on the side opposite the drain. Use a flat head screwdriver to gently pry the overflow plate off. Be careful not to damage the surrounding tiles or the bathtub surface. 4.Unscrew the Drain Stopper: Once the overflow plate is removed, you should be able to see the drain stopper. The stopper is typically held in place by a screw or a locking mechanism. Use the appropriate tool to loosen the screw or release the locking mechanism and remove the drain stopper. 5.Disconnect the Drain Pipe: The drain pipe is the curved pipe that connects the drain assembly to the main drain line. To disconnect the drain pipe, loosen the slip nut that secures it to the drain assembly. You may need to use an adjustable wrench to loosen the slip nut. Be careful not to drop the slip nut or any other small parts down the drain. 6.Remove the Drain Assembly: With the drain pipe disconnected, you can now remove the drain assembly. Use the adjustable wrench to loosen the drain flange, which is the large, round piece that holds the drain assembly in place. Once the drain flange is loose, you can lift the drain assembly out of the bathtub. 7.Clean or Replace the Drain Assembly: Inspect the drain assembly for any clogs or damage. If the drain is clogged, you can try to clean it using a drain cleaner or a snake. If the drain is damaged, you'll need to replace it with a new drain assembly. 8.Reinstall the Drain Assembly: To reinstall the drain assembly, simply reverse the steps you took to remove it. Insert the drain assembly into the bathtub and secure it with the drain flange. Tighten the slip nut to connect the drain pipe to the drain assembly. 9.Reattach the Drain Stopper and Overflow Plate: Reattach the drain stopper and the overflow plate. Make sure that the drain stopper is properly seated and that the overflow plate is securely in place. 10.Turn on the Water Supply and Test the Drain: Turn on the water supply valves and let the water flow into the bathtub to test the drain. Check for any leaks around the drain assembly or the overflow plate. If there are no leaks, the drain is properly installed and functioning correctly. Additional Tips: * If you're unsure about how to remove the bathtub drain, it's best to consult a professional plumber. * When reinstalling the drain assembly, apply a thin layer of plumber's putty around the base of the drain flange to create a watertight seal. * If the drain is clogged with hair, you can try to remove the hair using a drain snake or a pair of pliers. * If the drain is damaged, it's important to replace it as soon as possible to prevent leaks and further damage to the bathtub.