How To Take Out A Bathtub Stopper

How to Take Out a Bathtub Stopper

A bathtub stopper is a small device that is used to plug the drain hole in a bathtub, preventing water from flowing out. Bathtub stoppers can be made of a variety of materials, including rubber, plastic, and metal. Over time, bathtub stoppers can become clogged with hair, soap scum, and other debris, which can prevent them from working properly. If your bathtub stopper is not working properly, you may need to remove it to clean it or replace it. ### Steps to Remove a Bathtub Stopper 1.

Gather your tools and materials.

You will need: * A pair of pliers * A screwdriver * A bucket or bowl to catch the water that drains out of the bathtub * A flashlight (optional) 2.

Turn off the water supply to the bathtub.

This will prevent water from flowing out of the bathtub while you are working. 3.

Open the drain.

If there is a lever or knob that opens the drain, turn it to the open position. If there is no lever or knob, you can use a screwdriver to remove the drain cover. 4.

Locate the stopper.

The stopper is usually located in the center of the drain hole. It may be attached to a chain or a rod. 5.

If the stopper is attached to a chain,

you can simply pull the chain to remove the stopper. If the stopper is attached to a rod, you will need to use a pair of pliers to remove the rod. 6.

Once the stopper is removed,

inspect it for any damage. If the stopper is cracked or broken, you will need to replace it. 7.

Clean the stopper.

You can clean the stopper with a mild detergent and water. If the stopper is heavily clogged, you may need to soak it in a solution of vinegar and baking soda for a few hours before cleaning it. 8.

Reinstall the stopper.

Once the stopper is clean, you can reinstall it in the bathtub. If the stopper is attached to a chain, simply insert the chain into the drain hole and pull it until the stopper is in place. If the stopper is attached to a rod, insert the rod into the drain hole and turn it until the stopper is in place. 9.

Turn on the water supply to the bathtub.

Check to make sure that the stopper is working properly by turning on the water and allowing it to fill the bathtub. ## Troubleshooting If you are having trouble removing the bathtub stopper, try the following: *

Use a flashlight to inspect the drain hole.

This will help you to see if there is anything blocking the stopper. *

Try using a different tool to remove the stopper.

If you are using a pair of pliers, try using a screwdriver instead. *

If the stopper is heavily clogged,

you may need to soak it in a solution of vinegar and baking soda for a few hours before cleaning it. If you are still having trouble removing the bathtub stopper, you may need to call a plumber for assistance.