How To Replace Old Bathtub Faucet Handles

How to Replace Old Bathtub Faucet Handles

Bathtub faucet handles are an essential part of your bathroom, and they can make a big difference in the overall look and feel of the space. If your old bathtub faucet handles are looking tired, or if they're no longer working properly, replacing them is a relatively easy and inexpensive way to update your bathroom. Here's a step-by-step guide on how to do it.

Step 1: Gather Your Tools and Materials

Before you start, you'll need to gather a few tools and materials. Here's what you'll need.

New bathtub faucet handles
Screwdriver
Adjustable wrench
Plumber's putty
Rag

Step 2: Turn Off the Water Supply

Before you start working on the faucet, you'll need to turn off the water supply. This is usually done by turning off the valves under the sink. If you don't know where the valves are located, consult your owner's manual or call a plumber.

Step 3: Remove the Old Faucet Handles

Once the water supply is turned off, you can remove the old faucet handles. To do this, insert the screwdriver into the screw that is holding the handle in place. Turn the screwdriver counterclockwise to loosen the screw, and then pull the handle straight off. If the handle is difficult to remove, you can try using an adjustable wrench to loosen the screw.

Step 4: Clean the Faucet Body

Once the old faucet handles are removed, you'll need to clean the faucet body. This will help to ensure that the new handles fit properly. To clean the faucet body, use a rag and some plumber's putty. Apply the plumber's putty to the rag, and then wipe it around the faucet body. This will help to remove any old sealant or debris.

Step 5: Install the New Faucet Handles

Once the faucet body is clean, you can install the new faucet handles. To do this, insert the handle onto the faucet body, and then tighten the screw that is holding it in place. Use the screwdriver to tighten the screw, and then turn on the water supply to test the handles.

Step 6: Test the Handles

Once the new faucet handles are installed, you'll need to test them to make sure that they are working properly. To do this, turn on the water and check for any leaks. If there are any leaks, you may need to tighten the screws that are holding the handles in place.