How To Replace Bathtub Faucet Diverter

Replacing a bathtub faucet diverter is a relatively simple task that can be completed in a few steps. A diverter is a small device that controls the flow of water from the faucet to the showerhead. Over time, diverters can become worn or damaged, which can cause leaks or other problems. Replacing a diverter is a quick and easy way to fix these problems.

Tools and Materials You'll Need

Replacement diverter
Adjustable wrench
Phillips screwdriver

Step-by-Step Instructions

1. Turn off the water supply.

Locate the water supply valves under the sink and turn them off. This will prevent water from flowing out of the faucet when you remove the diverter.

2. Remove the old diverter.

Use the adjustable wrench to loosen the nut that holds the diverter in place. Once the nut is loose, you can remove the diverter by hand.

3. Install the new diverter.

Apply a thin bead of plumber's putty to the threads of the new diverter. This will help to create a watertight seal.

Insert the new diverter into the faucet and hand-tighten it. Then, use the adjustable wrench to tighten the nut that holds the diverter in place.

4. Turn on the water supply and check for leaks.

Turn on the water supply valves under the sink and check for leaks. If there are any leaks, tighten the nut that holds the diverter in place until the leak stops.

5. Reinstall the handle.

If you removed the handle to access the diverter, reattach it now. Use the Phillips screwdriver to tighten the screw that holds the handle in place.

Your bathtub faucet diverter is now replaced and ready to use.