How To Repair Chipped Bathtub

How to Repair a Chipped Bathtub

Repairing a chipped bathtub is a relatively simple process that can be completed in a few hours. By following these steps, you can restore your bathtub to its former glory.

Materials you will need:

Sandpaper (100- and 180-grit)
A clean cloth or sponge
AcrylPro or other epoxy-based bathtub repair kit
A putty knife or small spatula

Steps to Repair a Chipped Bathtub:

1. Clean the chip

Start by cleaning the chipped area with a clean cloth or sponge and hot water. Remove any dirt or debris from the chip so that the epoxy will adhere properly.

2. Sand the chip

Once the chip is clean, sand the edges of the chip with 100-grit sandpaper. This will help create a smooth and even surface for the epoxy to adhere to.

3. Apply the epoxy

Using a putty knife or small spatula, apply the epoxy to the chip. Fill the chip completely and smooth the epoxy over the edges. Allow the epoxy to cure for the time specified in the manufacturer's instructions.

4. Sand the epoxy

Once the epoxy has cured, sand the repaired area with 180-grit sandpaper. This will help smooth out the epoxy and blend it with the surrounding tub surface.

5. Clean the bathtub

Once the epoxy has been sanded, clean the bathtub with a clean cloth or sponge and hot water. Remove any dust or debris from the repaired area.

Tips:

If the chip is large, you may need to use a fiberglass repair patch to reinforce the repaired area.
If the chip is located in a high-traffic area of the bathtub, you may want to apply a clear sealant to the repaired area to protect it from further damage.
If you are not comfortable repairing the chip yourself, you can contact a professional bathtub repair technician.