How To Repair A Broken Bathtub

How to Repair a Broken Bathtub

A broken bathtub can be a major inconvenience, but it doesn't have to be a costly one. With the right tools and a little bit of know-how, you can repair most bathtub cracks, chips, and holes yourself. Here's a step-by-step guide to help you get started:

1. Gather your materials

Before you start, you'll need to gather the following materials:

Sandpaper (80-grit and 220-grit)
Putty knife
Epoxy repair kit
Acetone or rubbing alcohol
Clean rags

2. Clean the area

Start by cleaning the area around the broken bathtub. Use acetone or rubbing alcohol to remove any dirt, grime, or soap residue. This will help the epoxy adhere better.

3. Sand the area

Once the area is clean, sand it down with 80-grit sandpaper. This will create a rough surface for the epoxy to adhere to. After sanding, vacuum or wipe away any dust.

4. Apply the epoxy

Mix the epoxy according to the manufacturer's instructions. Apply a thin layer of epoxy to the broken area using a putty knife. Be sure to work the epoxy into all of the cracks and crevices. Allow the epoxy to cure for the recommended amount of time.

5. Sand the epoxy

Once the epoxy has cured, sand it down with 220-grit sandpaper. This will smooth out the surface and make it less noticeable.

6. Clean the bathtub

Use a clean rag to wipe down the bathtub and remove any dust or debris. Your bathtub is now repaired and ready to use!

Tips

Here are a few tips to help you get the best results when repairing a broken bathtub:

Use a high-quality epoxy repair kit.
Make sure to clean and sand the area before applying the epoxy.
Apply the epoxy in a thin layer and work it into all of the cracks and crevices.
Allow the epoxy to cure for the recommended amount of time.
Sand the epoxy smooth after it has cured.