How To Remove Moen Bathtub Plug

How to Remove a Moen Bathtub Plug

Moen bathtub plugs are designed to create a watertight seal in the drain, allowing you to fill your bathtub with water. However, there may come a time when you need to remove the plug, such as when cleaning the drain or unclogging it. Removing a Moen bathtub plug is a simple process that can be completed in just a few minutes.

Tools You'll Need

Flathead screwdriver
Adjustable wrench
Drain plug wrench (optional)

Step-by-Step Instructions

Locate the drain plug. The drain plug is typically located in the center of the bathtub drain. It is a round or square piece of metal with a hole in the center.
Place the flathead screwdriver in the hole. Use the flathead screwdriver to pry the drain plug loose from the drain. Be careful not to damage the drain or the plug.
Remove the drain plug. Once the drain plug is loose, you can remove it by hand. If the plug is stuck, you can use adjustable wrench to loosen it.
Inspect the drain plug. Once the drain plug is removed, inspect it for any damage. If the plug is damaged, it may need to be replaced.
Clean the drain. While the drain plug is removed, take the opportunity to clean the drain. Remove any hair or debris that may be blocking the drain. You can use a drain cleaner to help dissolve any buildup.
Reinstall the drain plug. Once the drain is clean, reinstall the drain plug. Make sure to tighten the plug until it is snug.

Additional Tips

If you have a drain plug wrench, you can use it to remove the drain plug. This will make the process easier and faster.
If you are having difficulty removing the drain plug, you can try using a lubricant. Apply a few drops of lubricant to the drain plug and let it sit for a few minutes before trying to remove it.
If you are still having difficulty removing the drain plug, you may need to call a plumber.