How To Remove Drain Plug From Bathtub

How to Remove a Drain Plug from a Bathtub

Whether you're cleaning your bathtub, fixing a clogged drain, or simply replacing an old plug, knowing how to remove a drain plug is an essential skill for any homeowner. ###

Tools You Will Need

* Pliers * Screwdriver * Flashlight (optional) * Gloves (optional) ###

Steps to Remove a Drain Plug

Locate the Drain Plug

The drain plug is typically located at the bottom of the bathtub, in the center of the overflow drain. It may be covered by a decorative cover or strainer. 2.

Remove the Cover or Strainer

If the drain plug is covered by a decorative cover or strainer, you will need to remove it before you can access the plug. To do this, simply unscrew the cover or strainer using your hands or a wrench. 3.

Identify the Type of Drain Plug

There are two main types of drain plugs: pop-up plugs and screw-in plugs. Pop-up plugs are the most common type and are typically made of plastic or metal. Screw-in plugs are less common and are usually made of metal. 4.

Remove a Pop-Up Drain Plug

* To remove a pop-up drain plug, simply press down on the plug and then turn it counterclockwise until it comes loose. * If the plug is stuck, you may need to use pliers to loosen it. 5.

Remove a Screw-In Drain Plug

* To remove a screw-in drain plug, you will need to use a screwdriver. * Insert the screwdriver into the slot on the top of the plug and turn it counterclockwise until the plug comes loose. * If the plug is stuck, you may need to use pliers to loosen it. 6.

Clean the Drain Plug and Drain

Once you have removed the drain plug, it is important to clean it thoroughly. You can do this by using a mild detergent and a soft cloth. Rinse the plug well and dry it completely. You should also clean the drain itself while the plug is removed. You can do this by pouring a cup of baking soda and a cup of vinegar down the drain. Let the mixture sit for 30 minutes and then flush the drain with hot water. 7.

Reinstall the Drain Plug

Once the drain plug and drain are clean, you can reinstall the plug. * To reinstall a pop-up drain plug, simply insert the plug into the drain hole and press down until it clicks into place. * To reinstall a screw-in drain plug, insert the plug into the drain hole and turn it clockwise until it is snug. ###

Tips

* If you have difficulty removing the drain plug, you can try using a lubricant such as WD-40. * If the drain plug is damaged or worn, you may need to replace it. * If you are unsure how to remove a drain plug, you can always contact a plumber for assistance. ###

Conclusion

Removing a drain plug is a simple task that can be completed in just a few minutes. By following the steps in this article, you can easily remove any type of drain plug from a bathtub.