How To Remove Drain In Bathtub

How to Remove a Drain in a Bathtub

If your bathtub drain is clogged or damaged, you may need to remove it to clean or replace it. Removing a bathtub drain is a relatively simple task that can be completed with a few basic tools.

Tools and Materials

* Adjustable wrench * Plumber's putty * Putty knife * Rag * Bucket * Screwdriver

Instructions

1. Turn off the water supply to the bathtub. There is usually a valve located under the sink or behind the toilet that controls the water supply to the bathtub. Turn the valve clockwise to turn off the water. 2. Place a bucket under the drain. This will catch any water that leaks out when you remove the drain. 3. Loosen the drain cover. The drain cover is usually held in place by a few screws. Use a screwdriver to loosen the screws and remove the cover. 4. Remove the drain stopper. The drain stopper is located inside the drain cover. It is usually held in place by a few screws. Use a screwdriver to loosen the screws and remove the stopper. 5. Remove the drain body. The drain body is the main part of the drain. It is usually held in place by a few nuts. Use an adjustable wrench to loosen the nuts and remove the drain body. 6. Clean the drain hole. Use a putty knife and a rag to clean the drain hole. Remove any dirt, debris, or old plumber's putty. 7. Apply a new layer of plumber's putty to the drain hole. Use your fingers to spread the putty around the hole, creating a seal. 8. Reinstall the drain body. Insert the drain body into the drain hole and tighten the nuts. 9. Reinstall the drain stopper. Insert the drain stopper into the drain body and tighten the screws. 10. Reinstall the drain cover. Replace the drain cover and tighten the screws. 11. Turn on the water supply to the bathtub. Check for leaks around the drain. If there are any leaks, tighten the nuts or screws until the leak stops.

Additional Tips

* If the drain is difficult to remove, you may need to use a penetrating oil to loosen the nuts and bolts. * Be careful not to drop the drain body or stopper into the drain hole. If you do, you will need to retrieve it with a pair of pliers. * If you are replacing the drain, make sure to choose a drain that is the same size and type as the old drain. By following these steps, you can easily remove a drain in a bathtub.