How To Remove A Trip Lever Bathtub Drain

Essential Guide to Removing a Trip Lever Bathtub Drain

Removing a trip lever bathtub drain may appear daunting, but it is a straightforward task that can be accomplished with the right tools and a bit of patience. Whether you're replacing an old drain or unclogging a stubborn one, understanding the steps involved will help you complete the job efficiently and effectively.

Before proceeding, gather the following essential tools: a bucket, a pair of pliers, a screwdriver, and a flashlight (optional). Once you have your tools ready, follow these steps to successfully remove your trip lever bathtub drain:

Step 1: Gather Your Tools

Ensure you have all the necessary tools, including a bucket, pliers, screwdriver, and flashlight, before starting the process.

Step 2: Turn Off the Water Supply

Locate the water supply valves beneath the sink or near the bathtub and turn them off to prevent water from flowing into the drain while you work.

Step 3: Place a Bucket Underneath the Drain

Position a bucket directly under the drain to collect any water or debris that may spill out when removing the drain.

Step 4: Remove the Trip Lever

Using pliers, gently grip the trip lever and pull it straight up. If the lever is stuck, apply some penetrating oil and let it sit for a few minutes before trying again.

Step 5: Inspect the Drain Stopper

Once the trip lever is removed, you will see the drain stopper. Check if the stopper is clogged or损坏. If so, clean or replace it accordingly.

Step 6: Remove the Drain Grate

Locate the drain grate, which is usually held in place by screws. Use a screwdriver to remove the screws and lift the grate out.

Step 7: Remove the Drain Assembly

Use pliers to detach the drain assembly, which is the part that connects the drain stopper to the drainpipe. Pull straight up to remove it.

Step 8: Clean the Drainpipe

Using a flashlight, inspect the drainpipe for any clogs or debris. If necessary, use a drain snake or auger to clear any obstructions.

Step 9: Reassemble the Drain

Once the drainpipe is clean, reassemble the drain components in reverse order. Place the drain assembly back into the drainpipe, insert the drain grate, and screw it in place.

Step 10: Reinstall the Trip Lever

Press the trip lever into place until it snaps securely into its socket.

Step 11: Turn on the Water Supply

Turn the water supply valves back on and check for any leaks. If there are no leaks, your bathtub drain is successfully removed.

Remember, if you encounter any difficulties or complexities during the process, it's advisable to consult a licensed plumber for assistance.