How To Remove A Lift And Turn Bathtub Drain

How to Remove a Lift and Turn Bathtub Drain

A lift and turn bathtub drain is a type of bathtub drain that is opened and closed by lifting and turning a knob or lever. This type of drain is common in older bathtubs and can be difficult to remove. However, with the right tools and a little bit of know-how, it is possible to remove a lift and turn bathtub drain yourself.

Tools you will need:

Adjustable wrench
Hex key
Putty knife
Bucket
Flashlight
Replacement drain

Step-by-step instructions:

1. Turn off the water supply. The first step is to turn off the water supply to your bathtub. This will prevent water from leaking out of the drain when you remove it.

2. Remove the overflow plate. The overflow plate is a small plate that is located near the top of the bathtub. It is held in place by a few screws. Use a screwdriver to remove the screws and then lift off the overflow plate.

3. Remove the drain stopper. The drain stopper is a small plug that is located in the center of the drain. It is held in place by a few screws. Use a screwdriver to remove the screws and then lift out the drain stopper.

4. Remove the lift and turn mechanism. The lift and turn mechanism is located underneath the drain stopper. It is held in place by a few screws. Use a wrench to loosen the screws and then lift out the lift and turn mechanism.

5. Clean the drain. Once you have removed the lift and turn mechanism, you can clean the drain. Use a putty knife to scrape away any gunk or debris that has accumulated in the drain.

6. Install the replacement drain. Once you have cleaned the drain, you can install the replacement drain. Insert the drain into the drain hole and then tighten the screws. Make sure that the drain is securely in place.

7. Turn on the water supply. Once you have installed the replacement drain, you can turn on the water supply. Check for leaks and make sure that the drain is working properly.

Removing a lift and turn bathtub drain can be a difficult task, but it is possible to do it yourself with the right tools and a little bit of know-how. If you are not comfortable removing the drain yourself, you can always call a plumber for help.