How To Remove A Kohler Pop Up Bathtub Drain Plug

By Admin | August 31, 2024

How to Remove a Kohler Pop Up Bathtub Drain Plug

A pop-up bathtub drain plug is a convenient and elegant way to stop the flow of water from your bathtub. However, there may come a time when you need to remove the plug, such as when you need to clean it or replace it. Removing a Kohler pop-up bathtub drain plug is a relatively simple task that can be done in a few minutes.

Materials You'll Need

  • Phillips head screwdriver
  • Adjustable wrench
  • Bucket or bowl

Step-by-Step Instructions

1. Turn off the water supply to your bathtub. This is typically done by turning off the valves located under the sink.

2. Open the drain. Lift the stopper and pull it straight up.

3. Remove the overflow plate. The overflow plate is located on the side of the bathtub, near the top. Use a Phillips head screwdriver to remove the screws that hold the plate in place.

4. Remove the drain assembly. The drain assembly is located behind the overflow plate. Use an adjustable wrench to loosen the nuts that hold the assembly in place. Once the nuts are loose, you can pull the assembly out of the tub.

5. Remove the pop-up drain plug. The pop-up drain plug is located at the bottom of the drain assembly. Use an adjustable wrench to loosen the nut that holds the plug in place. Once the nut is loose, you can pull the plug out of the assembly.

6. Clean the drain assembly and the pop-up drain plug. Use a mild detergent and a soft cloth to clean the drain assembly and the pop-up drain plug. Rinse the parts thoroughly with water.

7. Reassemble the drain assembly. Insert the pop-up drain plug into the drain assembly. Tighten the nut that holds the plug in place.

8. Reinstall the drain assembly. Insert the drain assembly into the bathtub. Tighten the nuts that hold the assembly in place.

9. Reinstall the overflow plate. Place the overflow plate over the drain assembly. Tighten the screws that hold the plate in place.

10. Turn on the water supply to your bathtub and test the drain. The drain should now be fully functional.


How To Disassemble And Replace Your Kohler Bathtub Drain When It Stops Working Part 1068204

How To Remove Pop Up Tub Stopper Easy Method

How To Remove Pop Up Tub Stopper Easy Method

Bath Tub Drain Repair Kohler Toe Push

Bath Tub Drain Repair Kohler Toe Push

Bathroom Repair How To A Pop Up Tub Drain Stopper

Bathroom Repair How To A Pop Up Tub Drain Stopper

How To Remove Any Bathtub Stopper Pop Up Grate Or Plug

How To Remove A Bathtub Drain Stopper

How To Remove Bathtub Drain Stopper

How To Easily Remove Bathtub Drain Plug Stopper Pop Up Watco Shower

How To Easily Remove Bathtub Drain Plug Stopper Pop Up Watco Shower

Tip Toe Pop Up Bathtub Plug Assembly

How To Remove Push Style Bathtub Stopper Clean Drain

How To Remove Push Style Bathtub Stopper Clean Drain


Leave a Reply

Your email address will not be published. Required fields are marked *