How To Raise A Sunken Bathtub

How to Raise a Sunken Bathtub

A sunken bathtub can be an unsightly and uncomfortable addition to any bathroom. Luckily, it is possible to raise a sunken bathtub with a few simple steps.

Materials Needed

Tub support
Level
Screwdriver
Drill
Wrench

Instructions

Remove the Drain Cover. Remove the drain cover to expose the drain flange.
Install the Tub Support. Place the tub support under the bathtub, centered over the drain flange. Secure the support to the floor joists using screws.
Level the Bathtub. Use a level to check the bathtub and adjust the support as needed to level it.
Tighten the Bolts. Tighten the bolts on the tub support to secure the bathtub in place.
Reinstall the Drain Cover. Reinstall the drain cover.

Additional Tips

If the sunken bathtub is due to a weakened subfloor, it may be necessary to reinforce the floor before raising the bathtub.
If the bathtub is made of acrylic, use a sealant to fill any gaps between the tub and the tub support.
Do not overtighten the bolts on the tub support, as this can damage the bathtub.

Conclusion

Raising a sunken bathtub is a relatively simple process that can be completed in a few hours. By following these steps, you can restore your bathtub to its original position.