How To Open Bathtub Drain Cover

Essential Aspects of How to Open Bathtub Drain Cover

If your bathtub is draining slowly or not draining at all, the drain cover may be clogged. Fortunately, opening a bathtub drain cover is a relatively easy task that can be completed in a few simple steps.

Materials You'll Need:

Adjustable wrench
Plunger
Baking soda
Vinegar

Step 1: Remove the Overflow Plate

Locate the overflow plate, which is usually a small, round plate located near the top of the bathtub. Use an adjustable wrench to loosen the screws holding the plate in place and remove it.

Step 2: Use a Plunger

Place the plunger over the drain hole and pump it vigorously. This will help to create suction and dislodge any clogs in the drainpipe.

Step 3: Make a Baking Soda and Vinegar Solution

Pour 1/2 cup of baking soda into the drain, followed by 1/2 cup of white vinegar. This solution will create a fizzing action that can help to dissolve clogs.

Step 4: Remove the Drain Stopper

Use the adjustable wrench to loosen the screws holding the drain stopper in place and remove it. This will expose the drain cover.

Step 5: Unscrew the Drain Cover

Place the adjustable wrench on the drain cover and turn it counterclockwise to loosen it. Once it is loose, remove it by hand.

Step 6: Clean the Drain Cover and Pipe

Use a damp cloth to clean the drain cover and the exposed drainpipe. Remove any hair, soap scum, or other debris that may be clogging the drain.

Step 7: Reassemble the Drain

Place the drain cover back in place and tighten it clockwise using the adjustable wrench. Replace the drain stopper and tighten it with the screws. Finally, replace the overflow plate and tighten the screws.

Tips:

If the drain is still clogged after following these steps, you may need to call a plumber for professional assistance.
To prevent clogs in the future, clean your bathtub drain regularly by removing the cover and cleaning it with a damp cloth.
Avoid pouring grease or hair down the drain, as these can contribute to clogs.