How To Measure A Bathtub

How to Measure a Bathtub: A Comprehensive Guide

Measuring a bathtub accurately is crucial for seamless installation and a comfortable bathing experience. This guide will provide step-by-step instructions on how to measure a bathtub's length, width, and height, ensuring a perfect fit for your bathroom.

Materials Required

To accurately measure a bathtub, you will need the following tools:

Measuring tape
Pencil or marker
Level (optional)

Measuring the Length and Width

Step 1: Position the Measuring Tape

Place the end of the measuring tape at the bottom left corner of the bathtub's interior lip.

Step 2: Measure along the Bottom

Extend the tape measure along the bottom of the tub, parallel to the shorter end, until it reaches the bottom right corner of the interior lip.

Step 3: Measure the Width

Turn the tape measure 90 degrees and extend it from the center of the bottom edge (where you measured the length) to the top edge of the rim on one side.

Step 4: Record Measurements

Note down both the length and width measurements in inches or centimeters.

Measuring the Height

Step 1: Place the Level

(Optional) If the bathtub is not level, use a level to ensure accuracy while measuring the height.

Step 2: Measure from the Floor

Place the end of the measuring tape on the floor directly under the highest point of the bathtub rim.

Step 3: Measure to the Rim

Extend the tape measure vertically to the top edge of the bathtub rim.

Step 4: Record Height

Note down the height measurement in inches or centimeters.

Additional Tips

Take multiple measurements to ensure accuracy.
If the bathtub has a curved or angled rim, measure at multiple points along the edge.
Consider the space available around the bathtub to ensure it will fit comfortably with enough room for showering and fixtures.

By following these steps, you can accurately measure your bathtub and make an informed decision when selecting a replacement or designing a new bathroom.