How To Install A Drain In The Bathtub

How to Install a Drain in the Bathtub

Installing a drain in a bathtub is a relatively straightforward task that can be completed in a matter of hours. However, it is important to follow the instructions carefully to ensure that the drain is installed properly and that there are no leaks.

Here are the steps on how to install a drain in a bathtub:

Turn off the water supply to the bathtub. This can be done by turning the valve under the sink or by turning off the main water supply to the house.
Remove the old drain. To do this, unscrew the drain stopper and then remove the drain body. You may need to use a pair of pliers to loosen the drain body.
Clean the drain hole. Remove any debris from the drain hole using a brush or a rag.
Apply plumber's putty to the new drain body. Roll out a rope of plumber's putty and then apply it to the rim of the new drain body.
Install the new drain body. Insert the new drain body into the drain hole and then tighten it by hand. You can use a wrench to further tighten the drain body, but be careful not to overtighten it.
Attach the drain stopper. Screw the drain stopper onto the drain body.
Turn on the water supply to the bathtub. Check for any leaks. If there are any leaks, tighten the drain body or the drain stopper.

Tips for installing a drain in a bathtub:

Use a flashlight to see inside the drain hole when you are cleaning it.
If you are having difficulty removing the old drain body, you can use a penetrating oil to loosen it.
Be careful not to overtighten the drain body or the drain stopper. This can damage the drain.
If you are not comfortable installing a drain in a bathtub, you can hire a plumber to do it for you.