How To Install A Bathtub Without Access Underneath

How to Install a Bathtub Without Access Underneath

Installing a bathtub can be a daunting task, especially if you don't have access underneath. However, with careful planning and the right tools, it is possible to install a bathtub without access underneath. Here are the steps on how to do it: ### 1. Gather Your Tools and Materials Before you begin, gather the following tools and materials: - New bathtub - Tub surround or tiles - Adhesive - Caulk - Bathtub drain and overflow kit - P-trap - Adjustable wrench - Plumber's putty - Hacksaw - Level - Tape measure - Pencil ### 2. Prepare the Area * Remove the old bathtub and any fixtures that are in the way. * Clean the area thoroughly, making sure to remove all dirt, debris, and old adhesive. * Level the floor by using a self-leveling compound or shims. ### 3. Install the Bathtub Drain and Overflow Kit * Assemble the bathtub drain and overflow kit according to the manufacturer's instructions. * Apply a bead of plumber's putty to the drain flange and insert it into the drain hole in the bathtub. * Tighten the drain flange until it is snug. * Install the overflow drain in the same way. ### 4. Install the Bathtub * Position the bathtub in the desired location. * Level the bathtub using a level and shims as needed. * Apply a bead of adhesive to the bottom of the bathtub. * Carefully lift the bathtub into place and press it firmly onto the adhesive. ### 5. Install the Tub Surround or Tiles * If you are using a tub surround, follow the manufacturer's instructions for installation. * If you are using tiles, apply a thin layer of adhesive to the wall where the tiles will be installed. * Press the tiles into the adhesive, making sure that they are level and evenly spaced. ### 6. Install the P-Trap * Assemble the P-trap according to the manufacturer's instructions. * Attach the P-trap to the drain pipe. * Tighten the nuts until they are snug. ### 7. Connect the Water Supply Lines * Connect the water supply lines to the bathtub faucet. * Tighten the nuts until they are snug. ### 8. Test the Bathtub * Turn on the water supply and check for leaks. * If there are any leaks, tighten the nuts until the leaks stop. ### 9. Caulk the Bathtub * Apply a bead of caulk around the bathtub, where it meets the wall and the floor. * Smooth the caulk with a wet finger. ### 10. Enjoy Your New Bathtub! Your new bathtub is now installed and ready to use. Enjoy your new bathing experience!

Tips:

- If you are not comfortable installing a bathtub without access underneath, you can hire a professional plumber to do it for you. - Make sure to read the manufacturer's instructions carefully before beginning the installation. - Be patient and take your time. Installing a bathtub can be a time-consuming process. - If you have any questions, consult with a professional plumber.