How To Fix A Stuck Bathtub Drain Stopper

How to Unclog a Stuck Bathtub Drain Stopper

A clogged bathtub drain stopper can be a common problem, but it's a relatively easy fix. There are a few different tools and methods you can use to unclog the stopper, depending on what's causing the clog in the first place. With the right approach, you can get your bathtub drain working properly again in just a few minutes.

Remove the stopper. The first step is to remove the stopper so you can inspect it and clean it. Most stoppers are held in place by a simple screw or bolt that you can loosen with a screwdriver or wrench. Once you've removed the stopper, take it to the sink and clean it with soap and water. If the stopper is made of metal, you can also use a vinegar and baking soda solution to remove any mineral deposits.

Check for hair and debris. Once the stopper is removed, you can check for hair and debris that may be clogging the drain. You can use a pair of tweezers or a needle-nose pliers to remove any hair or debris that you see.

Clean the drain. Once you've removed any hair or debris, you can clean the drain with a drain cleaner. There are a variety of drain cleaners available at most hardware stores. Be sure to follow the instructions on the bottle carefully.

Flush the drain. Once you've cleaned the drain, flush it with hot water. This will help to remove any remaining debris and ensure that the drain is flowing properly.

Reinstall the stopper. Once the drain is clean, you can reinstall the stopper. Be sure to tighten the screw or bolt that holds the stopper in place.