How To Fix A Slow Bathtub Drain

How to Fix a Slow Bathtub Drain

A slow bathtub drain can be a frustrating issue, but it's usually one that you can fix yourself with a few simple tools. Here are the steps you need to take:

1. Remove the Drain Stopper

The first step is to remove the drain stopper. Most stoppers are held in place by a simple screw that you can remove with a screwdriver. Once the screw is removed, you can pull the stopper out of the drain.

2. Clean the Drain Hole

Once the stopper is removed, you can clean the drain hole. You can use a small brush or a piece of wire to remove any hair or debris that may be blocking the drain. You can also use a drain cleaner to help dissolve any buildup.

3. Inspect the Drain Trap

The drain trap is a U-shaped pipe that is located under the sink. It is designed to catch hair and debris before it can enter the drain line. Over time, the drain trap can become clogged, which can lead to a slow drain.

To inspect the drain trap, you will need to remove it from the sink. Most drain traps are held in place by two nuts that you can loosen with a wrench. Once the nuts are loosened, you can pull the drain trap out of the sink.

Inspect the drain trap for any clogs. If you find any clogs, you can remove them with a small brush or a piece of wire. You can also use a drain cleaner to help dissolve any buildup.

4. Reinstall the Drain Trap

Once you have cleaned the drain trap, you can reinstall it in the sink. Tighten the nuts that hold the drain trap in place, and then reconnect the drain line.

5. Test the Drain

Once you have reinstalled the drain trap, you can test the drain to make sure it is working properly. Run water into the sink and check to see if the drain is draining properly.

If the drain is still slow, you may need to call a plumber to take a look at it. There may be a more serious problem with the drain line that you cannot fix yourself.