How To Fix A Lift And Turn Bathtub Stopper

How to Fix a Lift and Turn Bathtub Stopper

A lift and turn bathtub stopper is a common type of bathtub stopper that is used to seal the drain and prevent water from leaking out. Over time, these stoppers can become worn or damaged, which can cause them to leak. If your lift and turn bathtub stopper is leaking, there are a few things you can do to fix it.

Step 1: Remove the stopper

The first step is to remove the stopper from the drain. To do this, simply lift the stopper up and turn it counterclockwise. Once the stopper is loose, you can pull it out of the drain.

Step 2: Inspect the stopper

Once the stopper is removed, inspect it for any damage. If the stopper is cracked or broken, it will need to be replaced. If the stopper is not damaged, you can proceed to the next step.

Step 3: Clean the stopper and drain

The next step is to clean the stopper and drain. To do this, use a mild soap and water solution. Be sure to rinse the stopper and drain thoroughly after cleaning.

Step 4: Lubricate the stopper

Once the stopper and drain are clean, you can lubricate the stopper. To do this, apply a small amount of petroleum jelly or plumber's grease to the rubber gasket on the bottom of the stopper. This will help to create a seal and prevent the stopper from leaking.

Step 5: Reinstall the stopper

The final step is to reinstall the stopper. To do this, simply insert the stopper into the drain and turn it clockwise until it is tight. Be sure to test the stopper to make sure that it is not leaking.

If you have followed these steps and the stopper is still leaking, there may be a more serious problem with the drain. In this case, you will need to call a plumber to fix the problem.