How to Adjust Kohler Bathtub Drain Stopper
Kohler bathtubs are known for their quality and durability, but even the best products can sometimes run into issues. One common problem is a drain stopper that doesn't close properly. If you're having this problem, don't worry - it's usually a relatively easy fix.
In this article, we'll walk you through the steps on how to adjust a Kohler bathtub drain stopper. We'll also provide some troubleshooting tips in case you're still having problems.
Tools You'll Need
- Phillips head screwdriver
- Adjustable wrench
- Needle-nose pliers
- Flashlight
Steps
1. Remove the drain cover.The drain cover is usually held in place by two screws. Use a Phillips head screwdriver to remove the screws, then lift the drain cover off.
2. Inspect the linkage.The linkage is the part of the drain stopper that connects it to the drain lever. Make sure that the linkage is properly attached to both the drain stopper and the drain lever.
3. Adjust the linkage.If the linkage is not properly adjusted, it can cause the drain stopper to not close properly. To adjust the linkage, use an adjustable wrench to loosen the nut that holds the linkage in place. Then, move the linkage so that the drain stopper closes completely when the drain lever is in the down position. Tighten the nut to secure the linkage in place.
4. Reinstall the drain cover.Once you have adjusted the linkage, reinstall the drain cover. Make sure that the drain cover is properly aligned before tightening the screws.
5. Test the drain stopper.Once you have reinstalled the drain cover, test the drain stopper to make sure that it is working properly. Fill the bathtub with water and then close the drain stopper. The water should stop flowing out of the bathtub.
Troubleshooting
If you are still having problems with your Kohler bathtub drain stopper, there are a few things you can try:
- Check the drain stopper for debris. If the drain stopper is clogged with hair or other debris, it will not be able to close properly. Use a needle-nose pliers to remove any debris from the drain stopper.
- Inspect the drain lever. Make sure that the drain lever is not bent or damaged. If the drain lever is damaged, it will not be able to open and close the drain stopper properly.
- Call a plumber. If you have tried all of the above troubleshooting tips and you are still having problems with your Kohler bathtub drain stopper, it is time to call a plumber. A plumber can diagnose the problem and make the necessary repairs.
Bath Tub Drain Repair Kohler Toe Push
How To Disassemble And Replace Your Kohler Bathtub Drain When It Stops Working Part 1068204
Replace And Adjust Ing Bath Drain
Replace And Adjust Ing Bath Drain
Bath Tub Drain Repair Kohler Toe Push
Bathroom Repair How To A Pop Up Tub Drain Stopper
Bathroom Repair How To A Pop Up Tub Drain Stopper
Bathtub How Can I Remove A Stuck Bath Stopper Assembly Home Improvement Stack Exchange
Tip Toe Pop Up Bathtub Plug Assembly
How To Replace Bathtub Drain Stopper With A Lift And Turn Diy
