How To Add A Shower Head Bathtub Faucet And

How to Add a Shower Head to a Bathtub Faucet

Adding a shower head to a bathtub faucet is a great way to improve your bathing experience. It's a relatively easy project that can be completed in a few hours. Here's a step-by-step guide on how to do it: ### Tools and Materials: - Adjustable wrench - Phillips head screwdriver - Flat head screwdriver - Teflon tape - Plumber's putty - New shower head - Shower arm (if needed) - Wall mount (if needed) ### Step 1: Turn Off the Water Supply Before you start working on the faucet, turn off the water supply to the bathtub. There will likely be two valves, one for hot water and one for cold water. Turn both valves clockwise until they are fully closed. ### Step 2: Remove the Old Shower Head (if Applicable) If your bathtub faucet already has a shower head, you'll need to remove it before you can install the new one. 1.

Unscrew the shower head from the shower arm.

Use an adjustable wrench to loosen the nut that is holding the shower head in place. 2.

Remove the shower arm (if needed).

If the shower arm is removable, use an adjustable wrench to loosen the nut that is holding it in place. ### Step 3: Install the New Shower Head 1.

Wrap the threads of the new shower head with Teflon tape.

This will help to create a watertight seal. 2.

Screw the shower head onto the shower arm.

Hand-tighten the shower head until it is snug. 3.

Use an adjustable wrench to tighten the shower head.

Be careful not to overtighten the shower head, as this could damage the threads. ### Step 4: Install the Shower Arm (if Needed) If you are installing a new shower arm, follow these steps: 1.

Apply a bead of plumber's putty to the threads of the shower arm.

This will help to create a watertight seal. 2.

Screw the shower arm into the wall mount.

Hand-tighten the shower arm until it is snug. 3.

Use an adjustable wrench to tighten the shower arm.

Be careful not to overtighten the shower arm, as this could damage the threads. ### Step 5: Turn On the Water Supply Once the shower head and shower arm are installed, turn on the water supply to the bathtub. Check for leaks around the shower head and shower arm. If you see any leaks, tighten the connections until the leaks stop. ### Step 6: Enjoy Your New Shower! Once the shower head and shower arm are installed and there are no leaks, you can enjoy your new shower! Here are some additional tips for adding a shower head to a bathtub faucet: - If you are not comfortable working with plumbing, you can hire a professional plumber to do the job for you. - Be careful not to overtighten the connections, as this could damage the threads. - Use Teflon tape to create a watertight seal around the threads of the shower head and shower arm. - Apply a bead of plumber's putty to the threads of the shower arm to create a watertight seal.