Fix Chips In Bathtub - Home Bathtub

Fixing Chips in a Bathtub

A chipped bathtub can be an eyesore, especially if the chip is large or in a prominent location. Fortunately, fixing a chip in a bathtub is a relatively easy task that can be completed in a few hours. ### Materials You'll Need * Bathtub repair kit * Sandpaper (120-grit and 220-grit) * Acetone * Clean cloth * Masking tape * Utility knife ### Step-by-Step Instructions

1. Prepare the Surface

* Clean the chipped area with acetone and a clean cloth to remove any dirt or debris. * Dry the area thoroughly. * Use masking tape to protect the surrounding area from the repair materials.

2. Sand the Chipped Area

* Use 120-grit sandpaper to sand the edges of the chip to create a smooth surface. * Switch to 220-grit sandpaper and sand the entire chipped area until it is completely smooth.

3. Apply the Repair Material

* Follow the instructions included with the bathtub repair kit to mix the repair material. * Apply a thin layer of the repair material to the chipped area using a putty knife or your fingers. * Smooth the repair material over the chip, making sure to fill it completely.

4. Allow the Repair Material to Dry

* Allow the repair material to dry according to the manufacturer's instructions. This may take several hours or overnight.

5. Sand and Finish

* Once the repair material is dry, sand the area again with 220-grit sandpaper to smooth it out. * Clean the area with acetone and a clean cloth. * Apply a bathtub sealant around the edges of the repair for added protection.

Tips for Success

* Use a high-quality bathtub repair kit designed specifically for the type of bathtub you have. * Be patient and take your time to ensure a smooth and professional-looking repair. * If the chip is large or deep, you may need to repeat the repair process several times. * Allow the repair material to dry completely before using the bathtub again. By following these steps, you can easily fix a chip in your bathtub and restore its appearance.