Fix Chip In Bathtub - Home Bathtub

Fix Chip in Bathtub: A Comprehensive Guide for DIY Repair

A chip in your bathtub can be an unsightly eyesore that can also lead to bigger problems if left untreated. The good news is that fixing a chip in a bathtub is a relatively easy and inexpensive DIY project that can be completed in a few hours.

Materials You'll Need:

Sandpaper (80-grit and 220-grit)
Putty knife
Acrylic epoxy repair kit
Rubbing alcohol
Clean cloths

Step-by-Step Instructions:

1. Clean the Area: Start by thoroughly cleaning the area around the chip with rubbing alcohol and a clean cloth. This will remove any dirt or debris that could interfere with the repair.

2. Sand the Area: Using 80-grit sandpaper, lightly sand the area around the chip to create a rough surface for the epoxy to adhere to. Once the area is roughed up, switch to 220-grit sandpaper and sand until the surface is smooth.

3. Apply the Epoxy: Mix the acrylic epoxy according to the manufacturer's instructions. Using a putty knife, apply a thin layer of epoxy to the chip, filling it in completely. Smooth the epoxy with the putty knife to ensure an even surface.

4. Cure the Epoxy: Allow the epoxy to cure for the time specified by the manufacturer. This can range from 24 to 48 hours.

5. Sand and Polish: Once the epoxy is cured, sand the repaired area using 220-grit sandpaper to remove any excess epoxy. Follow with a final sanding using a soft cloth with rubbing compound to polish the surface and blend it with the rest of the bathtub.