Delta Bathtub Faucet Handle Removal

Delta Bathtub Faucet Handle Removal: A Step-by-Step Guide

Replacing a bathtub faucet can be a daunting task, but it doesn't have to be. With the right tools and a little bit of know-how, you can easily remove the handle of your Delta bathtub faucet and have your new one installed in no time. Here's a step-by-step guide to help you through the process:

Step 1: Gather Your Tools

Before you begin, make sure you have all the tools you need. You will need:

A Phillips head screwdriver
A flat head screwdriver
A pair of pliers
A clean cloth

Step 2: Turn Off the Water Supply

Once you have your tools, the first thing you need to do is turn off the water supply to your bathtub. There are usually two shut-off valves located under the sink. Turn both valves clockwise to turn off the water.

Step 3: Remove the Handle Cap

Once the water is turned off, you can remove the handle cap. The handle cap is usually located on the top of the handle. Use a flat head screwdriver to gently pry the cap off.

Step 4: Remove the Handle Screw

Once the handle cap is removed, you will see a screw holding the handle in place. Use a Phillips head screwdriver to remove the screw.

Step 5: Pull the Handle Off

Once the screw is removed, you can pull the handle off the faucet. Be careful not to pull too hard, as you could damage the faucet.

Step 6: Remove the Cartridge

Once the handle is removed, you will see the cartridge. The cartridge is what controls the flow of water from the faucet. To remove the cartridge, use a pair of pliers to gently pull it straight out of the faucet.

Step 7: Install the New Cartridge

Once the old cartridge is removed, you can install the new one. To do this, simply insert the new cartridge into the faucet and push it in until it is seated.

Step 8: Reinstall the Handle

Once the new cartridge is installed, you can reinstall the handle. To do this, simply insert the handle onto the faucet and tighten the screw.

Step 9: Reinstall the Handle Cap

Once the handle is tightened, you can reinstall the handle cap. To do this, simply snap the cap back onto the handle.

Step 10: Turn On the Water Supply

Once the handle cap is reinstalled, you can turn on the water supply to your bathtub. To do this, simply turn both shut-off valves counterclockwise.

That's it! You have now successfully removed the handle from your Delta bathtub faucet. If you have any questions or concerns, please consult a qualified plumber.