Bathtub Not Draining After Snake

Bathtub Not Draining After Snake? Here's What to Do

If you've recently used a drain snake to clear a clog in your bathtub, but the water is still not draining properly, don't panic. There are a few possible reasons why this could be happening, and most of them can be fixed with a little effort.

1. The clog is not completely removed. Even if you manage to get the snake through the clog, there is a chance that some of the debris is still stuck in the drain. This can prevent water from flowing freely through the pipe.

2. The drain snake has damaged the pipe. If the snake is used too aggressively, it can damage the interior of the drain pipe. This can create a new clog or make it more difficult for water to flow through the pipe.

3. There is another clog further down the drain. The bathtub drain is connected to a larger sewer line that leads out of the house. If there is a clog in the sewer line, it can prevent water from draining from the bathtub.

4. The vent pipe is clogged. The vent pipe allows air to enter the drain system, which helps to keep water flowing smoothly. If the vent pipe is clogged, it can create a vacuum in the drain system that prevents water from draining properly.

How to fix it:

Try plunging the drain again. This can help to dislodge any remaining debris that may be stuck in the drain.
Check the vent pipe. The vent pipe is usually located on the roof of the house. Make sure that it is clear of any debris, such as leaves or snow.
Call a plumber. If you are unable to fix the problem yourself, you should call a plumber. A plumber can use a more powerful drain snake or hydro jet to clear the clog.