Bathtub Drain Stopper Stuck In Closed Position Shower Head Only

By Admin | September 10, 2024

Bathtub Drain Stopper Stuck in Closed Position: Shower Head Only

When the bathtub drain stopper becomes stuck in the closed position, it can be a frustrating experience. It can lead to water pooling in the tub, making it impossible to take a shower or use the sink. Fortunately, there are a few simple steps you can take to fix the problem.

Causes of a Stuck Drain Stopper

One of the most common causes of a stuck bathtub drain stopper is hair and soap scum buildup. Over time, these materials can accumulate on the stopper, forming a seal that prevents it from opening. Other causes include mineral deposits, rust, or a damaged stopper mechanism.

Tools You'll Need

To fix a stuck bathtub drain stopper, you will need the following tools:

  • Pliers
  • Adjustable wrench
  • Tub drain stopper tool (optional)
  • Baking soda
  • Vinegar

Step-by-Step Instructions

Follow these steps to fix a stuck bathtub drain stopper:

  1. Remove the stopper. If possible, use a tub drain stopper tool to remove the stopper. If you do not have a tool, you can use pliers to grasp the edges of the stopper and pull it out.
  2. Clean the stopper. Once the stopper is removed, clean it thoroughly using baking soda and vinegar. This will help to remove hair, soap scum, and other debris that may be causing it to stick.
  3. Clean the drain. While the stopper is removed, take the opportunity to clean the drain itself. Remove any hair or debris that may be clogging it.
  4. Inspect the stopper mechanism. If the stopper is still stuck after cleaning, inspect the mechanism. Look for any damaged or loose parts. If any parts are damaged, they may need to be replaced.
  5. Lubricate the stopper mechanism. If the stopper mechanism is not damaged, you can try lubricating it. Use a few drops of WD-40 or another type of lubricant to the moving parts.
  6. Reassemble the stopper. Once the stopper mechanism is lubricated, reassemble the stopper. Make sure that all parts are properly aligned and tightened.
  7. Test the stopper. Once the stopper is reassembled, test it to make sure that it is working properly.

If the above steps do not fix the problem, you may need to call a plumber for assistance.

Prevention

There are a few things you can do to prevent your bathtub drain stopper from getting stuck in the closed position:

  • Clean the stopper and drain regularly.
  • Avoid using harsh chemicals on the stopper.
  • Install a hair catcher in the drain to prevent hair from clogging it.

By following these tips, you can help to keep your bathtub drain stopper working properly.


Remove A Stuck Bath Stopper Assembly

Bathtub How Can I Remove A Stuck Bath Stopper Assembly Home Improvement Stack Exchange

How To Remove A Bathtub Drain Stopper

How To Remove A Bathtub Drain Stopper Mr Rooter

How To Remove A Bathtub Drain Stopper

How To Remove A Bathtub Drain Stopper

How To Remove A Bathtub Drain Forbes

How To Remove A Bathtub Drain Forbes Home

How To Remove A Bathtub Drain Stopper

How To Remove A Bathtub Drain Stopper

How To Remove Bathtub Drain Stopper

How To Remove Bathtub Drain Stopper That Spins Freely

How To Fix A Stuck Bathtub Drain

How To Fix A Stuck Bathtub Drain

The Stopper In Bathroom Sink That

The Stopper In Bathroom Sink That Pulls Up And Down To Operate On A Rod Between Hot Cold Knobs No Longer Works Is Stuck Shut Where It Can T

6 Ways To Remove Stuck Bathtub Drain

6 Ways To Remove Stuck Bathtub Drain Rusted Won T Budge

Everbilt Trip Lever 1 2 In White

Trip Lever 1 2 In White Poly Pipe Bath Waste And Overflow Drain Chrome


Leave a Reply

Your email address will not be published. Required fields are marked *