Bathtub Converted To Shower

Bathtub Converted To Shower: A Comprehensive Guide

Bathtubs can be a great addition to any home, but they can also be impractical for some people. If you're looking to save space, make your bathroom more accessible, or simply give it a new look, converting your bathtub to a shower is a great option. In this article, we'll provide you with a comprehensive guide on how to convert a bathtub to a shower, including step-by-step instructions, tips, and things to consider. ### Step 1: Plan and Prepare Before you begin, it's important to plan and prepare for the conversion. Here are a few things to consider: *

Budget:

Converting a bathtub to a shower can be a costly project, so it's important to set a budget before you begin. The cost will vary depending on the materials you choose and the complexity of the conversion. *

Timeline:

Converting a bathtub to a shower can take anywhere from a few days to a few weeks, depending on the scope of the project. Make sure you have enough time to complete the project before you start. *

Permits:

In some areas, you may need to obtain a permit before you can convert your bathtub to a shower. Check with your local building department to find out if a permit is required. ### Step 2: Gather Materials Once you have a plan in place, you'll need to gather the necessary materials. Here's a list of what you'll need: * Shower pan or liner * Shower drain * Shower valve and trim kit * Shower head * Shower arm * Tile or other wall surround material * Grout * Waterproof sealant * Tools (e.g., hammer, drill, screwdriver, level, etc.) ### Step 3: Remove the Bathtub The first step is to remove the bathtub. This can be a difficult and time-consuming task, but it's important to do it carefully to avoid damage to your bathroom. 1.

Turn off the water supply to the bathtub.

Disconnect the drain.

Remove the caulk around the bathtub.

Use a pry bar to pry the bathtub loose from the surrounding walls.

Carefully lift the bathtub out of the bathroom.

### Step 4: Install the Shower Pan or Liner Once the bathtub is removed, you'll need to install a shower pan or liner. This will create a waterproof barrier between the shower floor and the subfloor. 1.

Measure the area where the shower will be installed.

Cut the shower pan or liner to size.

Apply a layer of waterproof sealant to the subfloor.

Install the shower pan or liner.

Secure the shower pan or liner with screws or nails.

### Step 5: Install the Shower Drain Next, you'll need to install the shower drain. This will allow water to drain from the shower. 1.

Choose a shower drain that is compatible with your shower pan or liner.

Cut a hole in the shower pan or liner for the drain.

Connect the drain to the drainpipe.

Secure the drain with a drain cover.

### Step 6: Install the Shower Valve and Trim Kit The shower valve and trim kit will control the flow of water to the shower head. 1.

Choose a shower valve and trim kit that is compatible with your shower wall surround material.

Install the shower valve and trim kit according to the manufacturer's instructions.

### Step 7: Install the Shower Head and Shower Arm The shower head and shower arm will deliver water to the shower. 1.

Choose a shower head and shower arm that are compatible with your shower valve and trim kit.

Install the shower head and shower arm according to the manufacturer's instructions.

### Step 8: Install the Wall Surround The wall surround will protect the walls of your shower from water damage. 1.

Choose a wall surround material that is compatible with your shower pan or liner.

Install the wall surround according to the manufacturer's instructions.

### Step 9: Grout the Wall Surround Once the wall surround is installed, you'll need to grout it. This will help to seal the joints between the tiles or other wall surround material. 1.

Apply grout to the joints between the tiles or other wall surround material.

Use a grout float to spread the grout evenly.

Allow the grout to dry according to the manufacturer's instructions.

### Step 10: Seal the Shower Once the grout is dry, you'll need to seal the shower. This will help to prevent water from leaking out of the shower. 1.

Apply a waterproof sealant to the joints between the shower pan or liner and the wall surround.

Apply a waterproof sealant to the joints between the shower head and the shower arm.

Allow the sealant to dry according to the manufacturer's instructions.

### Tips for Converting a Bathtub to a Shower Here are a few tips to help you convert your bathtub to a shower successfully: *

Hire a professional:

If you're not comfortable working with plumbing or tile, it's best to hire a professional to convert your bathtub to a shower. *

Choose high-quality materials:

The materials you choose for your shower will have a big impact on the longevity and appearance of the shower. Choose high-quality materials that are designed to last. *

Take your time:

Converting a bathtub to a shower can be a time-consuming project. Don't rush through the process, or you could end up making mistakes. *

Follow the manufacturer's instructions:

When installing the shower pan, liner, valve, trim kit, shower head, and wall surround, be sure to follow the manufacturer's instructions carefully. ## Conclusion Converting a bathtub to a shower can be a great way to save space, make your bathroom more accessible, or simply give it a new look. By following the steps outlined in this article, you can convert your bathtub to a shower successfully.