How To Replace Bathtub Drain Stopper

How to Replace a Bathtub Drain Stopper

A bathtub drain stopper is a small but essential part of your bathroom. It prevents water from leaking out of the tub when it's not in use, and it also helps to keep the drain clear of hair and other debris. If your drain stopper is broken or worn out, you'll need to replace it to keep your tub functioning properly. Replacing a bathtub drain stopper is a relatively easy task that you can do yourself in a few minutes. Here's a step-by-step guide:

1. Gather Your Materials

Before you start, you'll need to gather a few materials: - A new bathtub drain stopper - A screwdriver - A pair of pliers - A bucket or bowl

2. Remove the Old Drain Stopper

Start by removing the old drain stopper. If the stopper is screwed in, use a screwdriver to loosen the screws. If the stopper is held in place by a clip, use a pair of pliers to remove the clip. Once the stopper is loose, lift it out of the drain.

3. Clean the Drain

Once the old stopper is removed, take a few minutes to clean the drain. Use a scrub brush and some household cleaner to remove any dirt or debris. Rinse the drain thoroughly with water.

4. Install the New Drain Stopper

Now it's time to install the new drain stopper. If the stopper is screwed in, simply screw it into the drain until it's snug. If the stopper is held in place by a clip, insert the clip into the drain and then snap the stopper into place.

5. Test the Drain Stopper

Once the new stopper is installed, test it to make sure it's working properly. Turn on the water and let it run into the tub. The stopper should prevent the water from leaking out. If the stopper is leaking, try tightening it further.

6. Clean Up

Once you're satisfied that the drain stopper is working properly, clean up any mess that you made. Dispose of the old stopper and any debris that you removed from the drain.

Additional Tips:

- When choosing a new drain stopper, make sure that it's the right size for your drain. The stopper should fit snugly into the drain, but it shouldn't be so tight that it's difficult to remove. - If you're having trouble removing the old drain stopper, you can try using a penetrating oil to loosen the screws or clip. - If you have a bathtub with an overflow drain, make sure that the new stopper has an overflow hole. This will allow water to drain out of the tub if the water level gets too high.