How to Remove Drain from Bathtub: A Step-by-Step Guide
Bathtubs are an essential fixture in many homes, providing a place to relax and unwind. However, over time, bathtub drains can become clogged with hair, soap scum, and other debris, causing water to drain slowly or not at all. If you're experiencing this problem, you may need to remove the drain from the bathtub to clean it or replace it. Tools and Materials Before you start, gather the following tools and materials: * Adjustable wrench * Channel-lock pliers * Screwdriver * Putty knife * Gloves * Safety glasses * Old towels or rags * Bucket * Drain cleaner (optional) Step-by-Step Instructions 1. Turn Off the Water Supply: Before you do anything, shut off the water supply to your bathtub. This will prevent water from leaking out when you remove the drain. You can usually find the water supply valves under the sink or in a nearby closet. 2. Protect Yourself: Put on gloves and safety glasses to protect yourself from chemicals and sharp objects. 3. Remove the Drain Cover: The drain cover is usually held in place by one or two screws. Use a screwdriver to remove the screws, then pry off the drain cover using the putty knife. 4. Remove the Drain Body: Depending on the type of drain you have, you may need to use an adjustable wrench or channel-lock pliers to remove the drain body. Place the wrench or pliers around the drain body and turn counterclockwise to loosen it. Be careful not to damage the bathtub surface with the wrench or pliers. 5. Clean the Drain: Once you have removed the drain body, you will have access to the inside of the drainpipe. It may be clogged with hair, soap scum, or other debris. Use a drain cleaning tool or a pair of tongs to remove the debris. You can use a drain cleaner to further clean and deodorize the pipe. 6. Replace the Drain Body: Once the drain is clean, it's time to put it back together. Insert the drain body into the drainpipe and turn it clockwise until it is snug. Hand-tightening should be sufficient, but you can use a wrench or pliers to tighten it further if needed. 7. Replace the Drain Cover: Align the drain cover with the drain body and press it into place until it snaps into position. Replace the drain cover screws if necessary. 8. Turn on the Water Supply: Turn on the water supply to your bathtub and check for leaks. If you see any leaks, tighten the drain body or drain cover until the leak stops. 9. Test the Drain: Run water into the bathtub and check to make sure it drains properly. If the water drains slowly or not at all, you may need to repeat steps 4-7 or call a professional plumber for assistance. Tips and Troubleshooting * If you have a bathtub with an overflow drain, you will need to remove the overflow plate before you can remove the drain body. * Some drain bodies have a washer or gasket that helps to create a watertight seal. If the washer or gasket is damaged or missing, you will need to replace it before you reassemble the drain. * If you are having trouble removing the drain body, you may need to use a penetrating oil or lubricant to help loosen it. * If you are not comfortable working with plumbing, you can call a professional plumber to remove the drain for you. Conclusion Removing a bathtub drain is a relatively simple task that you can do yourself with the right tools and materials. By following the steps outlined in this guide, you can clean or replace your bathtub drain and get it working properly again in no time.
How To Remove A Bathtub Drain Forbes Home
4 Easy Ways To Remove A Tub Drain Stopper Wikihow
6 Ways To Remove Stuck Bathtub Drain Rusted Won T Budge
How To Remove 6 Diffe Bath Drain Types
4 Easy Ways To Remove A Tub Drain Stopper Wikihow
How To Remove A Bathtub Drain Stopper Mr Rooter
How To Easily Remove Bathtub Drain Plug Stopper Unclog In 1 Minute Jonny Diy
4 Easy Ways To Remove A Tub Drain Stopper Wikihow
Remove Drain Plug Without Removing 59 Clogged Bathtub Unclog
How To Remove Bathtub Drain Stopper That Spins Freely
