How To Replace Bathtub Faucet

How to Replace a Bathtub Faucet in Seven Easy Steps

Replacing a bathtub faucet is a relatively straightforward project that can be completed by most DIYers in about an hour or two. It's a relatively inexpensive repair, and it can make a big difference in the look and function of your bathroom. ### Tools and Materials You'll Need: - Adjustable wrench - Channel lock pliers - Allen wrench (if necessary) - Plumber's putty - Teflon tape - New bathtub faucet - Rags - Bucket ### Step-by-Step Instructions: 1.

Turn off the Water Supply:

Before you start, you'll need to turn off the water supply to your bathtub. This is usually done by turning the valve located under the sink or behind the toilet. If there is no valve, you will need to turn off the main water supply to your home. 2.

Remove the Old Faucet:

Once the water is turned off, you can remove the old faucet. Start by detaching the water supply lines from the faucet using your adjustable wrench. Then, use your channel lock pliers to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can remove the faucet from the bathtub. 3.

Clean the Faucet Area:

Use a rag and some cleaner to clean the area where the old faucet was located. This will help to remove any dirt or debris that may have accumulated. 4.

Apply Plumber's Putty:

Apply a ring of plumber's putty around the base of the new faucet. This will help to create a seal and prevent leaks. 5.

Install the New Faucet:

Insert the new faucet into the hole in the bathtub. Hand-tighten the nuts that hold the faucet in place. Then, use your adjustable wrench to tighten the nuts until they are snug. 6.

Attach the Water Supply Lines:

Attach the water supply lines to the new faucet using your adjustable wrench. Make sure to tighten the connections until they are snug. 7.

Turn on the Water Supply:

Turn on the water supply to your bathtub and check for leaks. If there are any leaks, tighten the connections until the leak stops. Congratulations! You have now successfully replaced your bathtub faucet. Enjoy your new, updated bathroom! ### Tips: - It's a good idea to have a bucket on hand to catch any water that may leak during the installation process. - If you're not sure which way to turn the nuts to tighten them, just remember "righty-tighty, lefty-loosey." - If you're having trouble getting the old faucet off, you can try using a penetrating oil to loosen the nuts. - If you're not comfortable working with plumbing, you can always call a professional plumber to do the job for you.