How To Replace A Pfister Bathtub Faucet Cartridge Replacement Instructions

How to Replace a Pfister Bathtub Faucet Cartridge: Step-by-Step

Replacing a Pfister bathtub faucet cartridge is a relatively simple task that can be completed in a matter of minutes. Here are the essential steps to follow:

Materials Required:

Phillips head screwdriver
Flathead screwdriver
New Pfister bathtub faucet cartridge

Step 1: Turn off the Water Supply

Locate the water supply valves beneath the sink and turn them off. This will prevent water from flowing out of the faucet when the cartridge is removed.

Step 2: Remove the Handle

Use a Phillips head screwdriver to remove the two screws holding the handle in place. Pull the handle straight towards you to remove it.

Step 3: Remove the Cap and Escutcheon

Use a flathead screwdriver to gently pry off the cap covering the cartridge. Then, unscrew the escutcheon (the decorative ring around the cartridge) using a Phillips head screwdriver.

Step 4: Remove the Cartridge

Use a Phillips head screwdriver to loosen the nut holding the cartridge in place. Once the nut is loose, pull the cartridge straight out of the faucet body.

Step 5: Insert the New Cartridge

Align the new cartridge with the faucet body and insert it straight into the housing. Tighten the nut by hand to secure it.

Step 6: Reassemble the Faucet

Replace the escutcheon and cap, then screw them back into place. Finally, replace the handle and tighten the screws to secure it.

Step 7: Turn on the Water Supply

Turn the water supply valves back on and check for any leaks. If there are no leaks, the cartridge replacement is complete.

Tips:

Make sure to purchase the correct Pfister bathtub faucet cartridge for your specific model.
If the cartridge is stuck, use a pair of pliers to gently remove it.
If you encounter any leaks after replacing the cartridge, tighten the nut further or check the o-rings for damage.