Sterling Bathtub Surround Installation Instructions

## Sterling Bathtub Surround Installation Instructions: A Step-by-Step Guide Installing a Sterling bathtub surround is a great way to update the look of your bathroom. The process is relatively simple and can be completed in a few hours. Here are the essential steps to ensure a successful installation:

**Step 1: Gather Your Tools and Materials**

Before you begin, gather the following tools and materials: * Sterling bathtub surround kit * Level * Caulk gun * Caulk * Utility knife * Measuring tape * Pencil

**Step 2: Remove the Old Surround (if applicable)**

If you are replacing an existing bathtub surround, you will need to remove it first. This can be done by carefully prying it away from the wall with a utility knife. Be careful not to damage the wall or the bathtub.

**Step 3: Clean the Wall and Bathtub**

Once the old surround is removed, clean the wall and bathtub thoroughly. This will help the new surround adhere properly.

**Step 4: Measure and Cut the Surround**

Measure the length and width of the area where the surround will be installed. Cut the surround to size using a utility knife.

**Step 5: Apply Caulk to the Wall**

Apply a bead of caulk around the perimeter of the area where the surround will be installed. This will help to seal the surround and prevent water from getting behind it.

**Step 6: Press the Surround into Place**

Press the surround into place on the wall. Make sure that the caulk bead is completely covered.

**Step 7: Level the Surround**

Use a level to check that the surround is level. If it is not level, adjust it until it is.

**Step 8: Secure the Surround**

Secure the surround to the wall using the provided screws.

**Step 9: Caulk the Joints**

Apply a bead of caulk to all of the joints between the surround and the wall or bathtub. This will help to seal the surround and prevent water damage.

**Step 10: Allow the Caulk to Dry**

Allow the caulk to dry completely before using the bathtub. This will give the caulk time to set and seal properly. By following these steps, you can successfully install a Sterling bathtub surround and enjoy a beautiful, updated bathroom.