How To Get Bathtub Drain Out

How to Get a Bathtub Drain Unclogged

A clogged bathtub drain can be a frustrating and time-consuming problem to deal with. However, with the right tools and a little bit of know-how, you can usually clear the clog yourself without having to call a plumber. Here are a few simple steps on how to unclog a bathtub drain:

1. Remove the drain cover. The drain cover is usually held in place by a few screws. Once you have removed the screws, you can lift the cover off to expose the drain hole.

2. Insert the drain snake. A drain snake is a long, flexible cable with a hook or auger on the end. Insert the snake into the drain hole and turn the handle to feed the cable down the drain. As you turn the handle, the hook or auger will catch on the clog and break it up.

3. Pull out the drain snake. Once you have broken up the clog, slowly pull the drain snake out of the drain. Be sure to rinse the snake off with water before you put it away.

4. Check for leaks. Once you have removed the drain snake, turn on the water and check for leaks. If there are any leaks, tighten the drain cover screws until the leaks stop.

5. Prevent future clogs. To prevent future clogs, avoid putting hair, soap scum, and other debris down the drain. You can also use a drain guard to catch hair and other debris before it gets into the drain.

If you have tried all of the above steps and your bathtub drain is still clogged, you may need to call a plumber. However, in most cases, you can clear the clog yourself by following these simple steps.