How To Replace A Bathtub And Wall Surround

Replacing a bathtub and wall surround is a big project, but it's one that can be completed in a weekend with the right tools and materials. Here's a step-by-step guide to help you get the job done.

Step 1: Remove the old bathtub

The first step is to remove the old bathtub. To do this, you'll need to disconnect the water supply lines and drain the tub. Once the tub is empty, you can remove the screws that are holding it in place and lift it out of the space.

Step 2: Prepare the space for the new bathtub

Once the old bathtub is removed, you'll need to prepare the space for the new one. This may involve leveling the floor and framing in the wall for the new surround. If you're not comfortable doing this yourself, you can hire a contractor to help.

Step 3: Install the new bathtub

Once the space is prepared, you can install the new bathtub. To do this, you'll need to set the tub in place and connect the water supply lines. Once the tub is connected, you can caulk around the edges to seal it in place.

Step 4: Install the wall surround

The next step is to install the wall surround. To do this, you'll need to cut the surround to fit the space and then attach it to the wall. You can use adhesive or screws to attach the surround, depending on the type of material you're using.

Step 5: Grout the wall surround

Once the wall surround is installed, you'll need to grout the joints between the tiles. To do this, you'll need to mix grout according to the manufacturer's instructions and then apply it to the joints. Once the grout is applied, you'll need to let it dry completely.

Step 6: Seal the bathtub and wall surround

The final step is to seal the bathtub and wall surround. To do this, you'll need to apply a silicone caulk to the joints between the tub and the surround. You'll also need to caulk around the drain and overflow.

Tips for replacing a bathtub and wall surround

* If you're not comfortable doing this project yourself, you can hire a contractor to help. * Be sure to measure the space carefully before purchasing a new bathtub and wall surround. * Use a level to make sure that the bathtub and wall surround are installed evenly. * Allow the grout to dry completely before using the bathtub.