How To Fix A Broken Bathtub Faucet Handle Replacement

How to Fix a Broken Bathtub Faucet Handle Replacement

A broken bathtub faucet handle is a common plumbing problem that can be easily fixed with a few simple tools. By following these steps, you can quickly and easily replace the handle and get your faucet working again in no time.

Tools You'll Need:

Replacement faucet handle
Allen wrench or screwdriver
Pliers
Adjustable wrench

Steps:

1. Turn off the water supply. This is located under the sink or behind the faucet. Be sure to turn off both the hot and cold water valves.

2. Remove the old handle. Locate the set screw that is holding the handle in place. Using an Allen wrench or screwdriver, loosen the screw and remove the handle.

3. Remove the cartridge. The cartridge is the part that controls the flow of water. Using pliers, grasp the cartridge and pull it straight out of the faucet body.

4. Install the new cartridge. Align the new cartridge with the faucet body and push it into place. Be sure to push it in all the way until it is seated properly.

5. Install the new handle. Place the new handle over the cartridge and tighten the set screw. Be sure to tighten the screw securely, but do not overtighten it.

6. Turn on the water supply. Slowly turn on the hot and cold water valves. Check for leaks around the handle and cartridge. If you find any leaks, tighten the set screw or cartridge until the leak stops.

7. Enjoy your new faucet handle! Your bathtub faucet should now be working properly again.

Additional Tips:

If you are not sure how to replace the cartridge, you can consult your faucet manufacturer's instructions.
Be careful not to overtighten the set screw or cartridge, as this can damage the faucet.
If you have any questions or concerns, do not hesitate to contact a professional plumber.