Remove Bathtub Drain Without Tool

A clogged bathtub drain can be a real nuisance, but don't despair; you don't always need to call a plumber. With a little elbow grease and the right techniques, you can remove the bathtub drain without any tools. Here's a step-by-step guide to help you get the job done:

Step 1: Gather Your Materials

Before you start, gather the following materials:

Plunger
Baking soda
Vinegar
Bucket or large bowl
Towel

Step 2: Plunge the Drain

Start by filling the bathtub with a few inches of water. Place the plunger over the drain and pump vigorously up and down. The suction created by the plunger may dislodge the clog.

Step 3: Use Baking Soda and Vinegar

If plunging doesn't work, try using baking soda and vinegar. Pour 1/2 cup of baking soda down the drain, followed by 1/2 cup of vinegar. Let the mixture sit for 15-30 minutes, then flush the drain with hot water.

Step 4: Remove the Drain Stopper

If the above methods fail, you may need to remove the drain stopper. To do this, place a damp towel over the overflow hole to prevent water from spilling out. Use your fingers or a pair of pliers to gently lift the drain stopper straight up.

Step 5: Clean the Drain

Once the drain stopper is removed, inspect it for any hair or debris. Use a small brush or your fingers to remove any buildup. If the drainpipe is also clogged, use a drain snake or a bent wire hanger to clear it.

Step 6: Reinstall the Drain Stopper

Once the drain is clean, reinstall the drain stopper by pushing it down into the drain hole. Make sure it fits snugly to prevent future clogs.

Tips:

For stubborn clogs, you may need to repeat the plunging or baking soda and vinegar treatment several times.
If you have a pop-up drain, you may need to use a special tool to remove it.
If you encounter any difficulties or suspect a serious problem, don't hesitate to call a plumber for professional assistance.