How To Fix Faucet In Bathtub

How to Repair a Faucet in a Bathtub

A leaking faucet can be an annoying problem, but it's one that you can usually fix yourself with a few simple tools. Here are the steps on how to repair a faucet in a bathtub:

1. Gather your tools and materials.

You will need the following tools and materials to repair a faucet:

Adjustable wrench
Phillips head screwdriver
Flathead screwdriver
Replacement washer (if necessary)
Plumber's tape

2. Turn off the water supply.

Before you start working on the faucet, you need to turn off the water supply. There are usually two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.

3. Remove the aerator.

The aerator is the small, mesh screen that is attached to the end of the faucet. It helps to aerate the water and create a more even flow. To remove the aerator, use an adjustable wrench to unscrew it from the faucet.

4. Remove the handle.

Once the aerator is removed, you can remove the handle. There is usually a small screw that holds the handle in place. Use a screwdriver to remove the screw and then pull the handle off.

5. Remove the cartridge.

The cartridge is the part of the faucet that controls the flow of water. To remove the cartridge, use an adjustable wrench to unscrew the retaining nut. Once the retaining nut is removed, you can pull the cartridge out of the faucet.

6. Inspect the cartridge.

Once the cartridge is removed, inspect it for any damage. If the cartridge is damaged, it will need to be replaced. If the cartridge is not damaged, you can clean it with a toothbrush and some CLR.

7. Reassemble the faucet.

Once the cartridge is cleaned or replaced, you can reassemble the faucet. To do this, insert the cartridge into the faucet and tighten the retaining nut. Then, replace the handle and the aerator.