How To Replace Bathtub Faucet With Diverter

How to Replace a Bathtub Faucet with a Diverter

Replacing a bathtub faucet with a diverter is a relatively simple task that can be completed in a few hours. However, it's important to follow the steps carefully to avoid any leaks or damage to your plumbing. Here are the essential steps on how to replace a bathtub faucet with a diverter:

1. Gather Your Tools and Materials:

New bathtub faucet with diverter
Adjustable wrench
Plumber's putty
Teflon tape
Bucket
Rags

2. Turn Off the Water Supply:

Locate the water supply valves under the sink and turn them off. This will prevent water from flowing into the faucet while you're working.

3. Remove the Old Faucet:

Use an adjustable wrench to loosen the nuts that hold the faucet in place.
Once the nuts are loose, carefully remove the faucet from the tub.
Clean the area around the faucet base with a damp cloth.

4. Install the New Faucet:

Apply a bead of plumber's putty around the base of the new faucet.
Wrap Teflon tape around the threads of the faucet.
Insert the faucet into the tub and tighten the nuts using an adjustable wrench.

5. Install the Diverter:

The diverter is a small valve that allows you to switch the flow of water from the faucet to the showerhead. To install the diverter:

Remove the handle from the old diverter.
Attach the new diverter to the faucet.
Tighten the screws that hold the diverter in place.
Install the handle on the new diverter.

6. Turn on the Water Supply:

Slowly turn on the water supply valves under the sink and check for any leaks. If there are no leaks, you have successfully replaced the bathtub faucet with a diverter.

Additional Tips:

If you're not comfortable replacing a bathtub faucet yourself, it's best to call a plumber.
Make sure to clean the area around the faucet base before installing the new faucet.
Use a level to ensure that the new faucet is installed correctly.
Tighten the nuts on the faucet securely, but do not overtighten them.