How To Remove Bathtub Stopper Base

How to Remove a Bathtub Stopper Base

If your bathtub stopper is stuck or won't seal properly, you may need to remove the stopper base. This is a relatively easy task that can be completed in a few simple steps.

Materials Required

* Adjustable wrench * Flat-head screwdriver * Clean cloth

Step-by-Step Instructions

1. Turn off the water supply to the bathtub. This will prevent water from leaking out while you are working. 2. Remove the drain cover. The drain cover is usually held in place by a few screws. Use a screwdriver to remove the screws and lift off the cover. 3. Locate the stopper base. The stopper base is a metal or plastic ring that is located around the drain opening. 4. Loosen the stopper base. Use an adjustable wrench to loosen the stopper base. Turn the wrench counterclockwise until the base is loose enough to remove by hand. 5. Remove the stopper base. Once the stopper base is loose, you can remove it by hand. 6. Clean the stopper base and drain opening. Use a clean cloth to clean the stopper base and the drain opening. Remove any debris or hair that may be clogging the drain. 7. Reinstall the stopper base. Place the stopper base back into the drain opening. 8. Tighten the stopper base. Use the adjustable wrench to tighten the stopper base. Turn the wrench clockwise until the base is snug. 9. Reinstall the drain cover. Place the drain cover back onto the drain opening. 10. Turn on the water supply to the bathtub. Check for leaks around the stopper base. If there are any leaks, tighten the stopper base further.

Tips

* If the stopper base is stuck, you can try using a penetrating oil to loosen it. Apply the oil to the threads of the stopper base and let it sit for a few minutes before trying to loosen it. * If you are having difficulty removing the stopper base, you can call a plumber for assistance.