How To Remove A Bathtub Drain Stopper Lift And Turn

How to Remove a Bathtub Drain Stopper Lift and Turn

Replacing a bathtub drain stopper is a relatively easy plumbing repair that can be done in just a few minutes. Below are the essential steps to remove a bathtub drain stopper lift and turn:

1. Materials Needed

New bathtub drain stopper
Adjustable wrench or pliers
Flashlight (optional)

2. Safety Precautions

Turn off the water supply to the bathtub.
If possible, open a window to ventilate the bathroom.
Wear gloves to protect your hands from sharp edges.

3. Locate the Stopper

The drain stopper lift and turn is typically located in the center of the drain hole.
It is a round or oval-shaped metal or plastic piece with a small handle or lever.

4. Remove the Stopper

Turn the handle or lever of the stopper counterclockwise.
Grasp the stopper with your hand or pliers and pull it straight up.
If the stopper is stuck, gently pry it loose with a screwdriver.

5. Clean the Drain

Once the stopper is removed, take a flashlight and inspect the drain.
Remove any hair, soap scum, or other debris that may be clogging the drain.
Flush the drain with hot water to clear out any remaining debris.

6. Install the New Stopper

Insert the new stopper into the drain hole.
Turn the handle or lever clockwise to secure the stopper.
Turn on the water supply and check for leaks.

Tips

If you are having difficulty removing the old stopper, you can try using a penetrating oil or lubricant.
Be careful not to overtighten the new stopper, as this could damage the drain.
Regularly cleaning the drain can help prevent clogs and extend the life of the stopper.