Replace Bathtub Faucet Double Handle

Replace Bathtub Faucet Double Handle: A Comprehensive Guide

Replacing a double handle bathtub faucet is a straightforward task that can be completed in a few hours. By following these step-by-step instructions, you can update your bathroom fixture and restore its functionality.

Step 1: Gather Materials and Tools

Before starting, ensure you have the necessary materials and tools:

New double handle bathtub faucet
Adjustable wrench
Channel-lock pliers
Teflon tape
Basin wrench (optional)

Step 2: Turn Off Water Supply and Remove Old Faucet

Locate the water supply valves under the sink or behind the bathtub and turn off both the hot and cold water. Open the faucet handles to release any residual water.
Use an adjustable wrench to loosen the nuts securing the faucet handles. Remove the handles, escutcheon plates, and any other decorative trim.
Below the deck, unscrew the nuts holding the faucet body in place using a channel-lock pliers. Carefully lift out the old faucet.

Step 3: Install New Faucet

Apply Teflon tape to the threads of the new faucet's mounting posts. Insert the posts through the faucet holes and secure them with nuts. Tighten the nuts firmly but do not overtighten.
Connect the water supply lines to the appropriate posts on the faucet. Use a basin wrench to tighten the connections securely.

Step 4: Install Handles and Trim

Place the escutcheon plates over the mounting posts and secure them with screws. Install the faucet handles and tighten them with an adjustable wrench.
Turn on the water supply and check for leaks. If any leaks occur, tighten the connections or apply additional Teflon tape.

Step 5: Final Touches

Remove any excess Teflon tape and debris from the faucet and surrounding area. Clean the faucet with a damp cloth and dry it thoroughly.
Enjoy your newly replaced double handle bathtub faucet!