How To Fix Stuck Bathtub Faucet Diverters In Singapore

Bathtub faucet diverters are essential for controlling the flow of water between the tub spout and the showerhead. Over time, however, these diverters can become stuck, preventing you from using your shower or bathtub properly. If you're facing this problem, don't worry – it's a relatively easy fix that you can do yourself.

Here's a step-by-step guide on how to fix a stuck bathtub faucet diverter in Singapore:

Turn off the water supply to your bathtub. This is usually done by turning the valves located under the sink.
Remove the aerator from the faucet. This is the small screen that screws onto the end of the faucet. You can usually remove it by hand, but if it's stuck, you can use a wrench.
Locate the diverter. The diverter is usually located behind the aerator. It's a small, cylindrical-shaped piece with a lever or knob that you can move to switch between the tub spout and the showerhead.
Try to move the diverter lever or knob. If it's stuck, you can try to loosen it by gently tapping it with a hammer.
If the diverter is still stuck, you may need to remove it. To do this, use a wrench to loosen the nut that holds the diverter in place. Once the nut is loose, you can pull the diverter out.
Clean the diverter. Once you've removed the diverter, clean it with a toothbrush and some CLR or other household cleaner.
Reinstall the diverter. Once the diverter is clean, reinstall it by screwing it back into place and tightening the nut.
Turn the water supply back on. Once the diverter is reinstalled, turn the water supply back on and check to make sure that the diverter is working properly.