How To Take The Plug Out Of A Bathtub Drain

Is your bathtub draining slowly or not draining at all? One of the most common causes of a clogged bathtub drain is a buildup of hair, soap scum, and other debris. If you're experiencing this problem, you can try to unclog the drain yourself by removing the plug and cleaning it out. Here's a step-by-step guide on how to do it:

Step 1: Gather the necessary tools. You will need a pair of pliers, a screwdriver, and a bucket.

Step 2: Turn off the water supply to the bathtub. This is usually done by turning off the valves under the sink. If you can't find the valves, you can turn off the main water supply to your home.

Step 3: Remove the overflow plate. This is the small plate that is located near the top of the bathtub. It usually has a few screws that hold it in place. Remove the screws and lift off the plate.

Step 4: Remove the stopper. The stopper is the part that plugs the drain. It is usually held in place by a screw or a clip. Remove the screw or clip and lift out the stopper.

Step 5: Clean the stopper and the drain. Use the pliers to remove any hair or debris that is stuck in the stopper or the drain. You can also use a screwdriver to scrape away any buildup. Once the stopper and drain are clean, rinse them with water.

Step 6: Reassemble the drain. Insert the stopper back into the drain and secure it with the screw or clip. Replace the overflow plate and tighten the screws.

Step 7: Turn on the water supply and test the drain. Open the faucet and let the water run for a few minutes. The drain should now be draining properly.

If you're still having trouble unclogging the drain, you may need to call a plumber. However, following these steps should be enough to solve most bathtub drain problems.