Replacing A Bathtub Drain

Replacing a Bathtub Drain: A Step-by-Step Guide

A leaky or clogged bathtub drain can be a major inconvenience. Not only is it unsightly, but it can also lead to water damage and mold growth. If you're experiencing problems with your bathtub drain, you may be able to fix it yourself with a few simple tools and materials. ### Tools and Materials Needed * Adjustable wrench * Plumber's putty * New bathtub drain assembly * Utility knife * Screwdriver * Bucket * Rags ### Steps 1.

Turn off the water supply to the bathtub.

You can usually do this by turning the valve located under the sink. If there is no valve, you will need to turn off the main water supply to your home. 2.

Place a bucket under the bathtub drain.

This will catch any water that leaks out when you remove the old drain. 3.

Use the adjustable wrench to loosen the drain cover.

The drain cover is usually held in place by one or two screws. Once the screws are loose, you should be able to remove the drain cover by hand. 4.

Remove the old drain assembly.

The drain assembly is usually held in place by a rubber gasket. You can use the utility knife to cut the gasket away. Once the gasket is cut, you should be able to remove the drain assembly by hand. 5.

Clean the drain hole.

Use the rags to clean the drain hole. Make sure to remove any debris or buildup. 6.

Apply plumber's putty to the new drain assembly.

Plumber's putty is a sealant that helps to prevent leaks. Apply a generous amount of plumber's putty to the underside of the new drain assembly. 7.

Insert the new drain assembly into the drain hole.

Press the drain assembly into the drain hole until it is flush with the surface of the bathtub. 8.

Replace the drain cover.

Screw the drain cover back into place. 9.

Turn on the water supply to the bathtub.

Check for leaks. If you see any leaks, tighten the drain assembly until the leak stops. ### Tips * If you are replacing a drain assembly that is corroded or damaged, you may need to replace the entire drainpipe. * If you are not comfortable working with plumbing, you can always call a professional plumber to replace the bathtub drain for you. * Replacing a bathtub drain is a relatively easy and inexpensive repair that can be completed in about an hour. By following these steps, you can save yourself the cost of hiring a plumber.